8 Features of EPS Sandwich Lightweight Wall Panel Compared to Traditional Concrete Precast Wall

  • Fireproofing. It is A-class fireproof material, hence it has endured 1000 degrees centigrade high temperature, 120 minutes combustion test.
  • Environmental friendly. In other words all materials of wall panel does not contain harmful and radioactive subatances to human body.
  • Lightweight. Since EPS sandwich wall panel weight is the sixth of concrete block.
  • Increase usable area. 75mm EPS wall panel can instead of 120mm traditional wall, and each 12m extender of the wall, usable area can be increased 1 ㎡.
  • Sound insulation.
  • High strength.
  • Short construction period.
HFP530A molding machine
Hongfa Wall Panels Project
Lightweight Wall Panels
Moulding Machine Parameter and Productivity
Overall dimensions(mm) Power(KW) Output / Pieces per mould
60mm 75mm 90mm 100mm 120mm 150mm

3890*3200*2680

5.5

 46pcs 44pcs 42pcs 40pcs 32pcs 30pcs

Advantages of HFP540A  Lightweight Concrete Wall Panel System

HFP540A full automatic lightweight concrete wall panel system is Hongfa patent product, for 10 sets molding machine, total production line only needs 7 women, labor density and intensity is low.
It adapts hydraulic de-molding system, it is fast and convenient, also suitable for pallet stacking. It can decrease broken rate efficiently.

HFP540A lightweight wall panel making machine features

  • PLC control system, the mould opening and closing is hydraulic, hence it can be controlled automatic.
  • In addition, the wall panel machine can produce the lightweight panel length of 3M, width of 60cm, thickness of 60-200mm. Panel size also can be produced by customer requirement.
  • Due to electrical and steam-powered heating system, it makes demoulding fast, short time conservation, and the cost is much less.
  • Because forming mold chamber has high stiffness, so panel making has high precision, the thickness is prospective, and the surface of panel is smooth.
  • Plastic core tube is lining metal tube, so it is durable, free washing, pulling tube by electric.
  • Horizontal molding machine adopts hydraulic and combining mold, it guarantees products accurate size, hence this distinguishs it from traditional equipment.

Neccessary Parts For EPS Sandwich Lightweight Wall Panel Production

Mixing and slurry infusion plant

Hongfa wall panel system mixer is different from wet blocks concrete mixer, our mixer is 3.6CBM, it uses screw stirrer to guarantee slurry and EPS mix together more evenly.

Lightweight Concrete Wall Panel System

Wall Panel Molding Car

High efficiency that 7 labors can finish 15sets molding car/8hours. Panel size 2440*610*100mm, 40pcs/molding car. Molding cars quantity decides total capacity of whole production line.

De-moulding machine

There are 2 de-moulding machines in 1 production line for default setting, if client's land is limited to accomodate 2 sides opening size of the molding machine, we provide single side de-moulding solution.

Polystyrene expander and EPS silos

The expander will be combined with boiler(usually capacity ranges from 0.5ton-2tons) to expand raw polystyrene bean into big granules, in panel formula, EPS proportion is around 70% based on volume.

Other featurers of the production line

Waste water recycle unit, customized aluminium mold, hollow core panel crane, L and T shape design for wall corners, non fiber cement board panel is available.. please contact us to get exact proposal based on your demand.

If you are interested in these products, please leave your message, our relevant staff will contact you quickly.